Details
Strap Toggle Hollow Wall Anchor
The Strap-Toggle is a heavy duty hollow wall anchor designed for use in base materials such as plaster, wallboard, concrete block or hollow tile.The Strap-Toggle is a pre-assembled anchor consisting of a carbon steel wing and a locking cap / ratchet leg assembly molded from engineered plastic. It is available in 3/16", 1/4", 3/8" and 1/2" sizes.When compared to traditional toggles, this unique anchor can be installed through a smaller hole and does not require a fixture or screw to set it.The anchor can be easily adjusted to accomodate a wall thickness of up to 2 1/2" while using a shorter bolt. The bolt and fixture may be installed and removed as often as necessary.
Features and Benefits :
Adjustable to accommodate various wall thickness up to 2 1/2"Allows for fixture and bolt/screw removal and re-anchoringFederal GSA Specification - Meets the descriptive requirements of FF-B-588D, Type V for a captive toggle (Superseded)
Material Specifications :
| Anchor Component | Component Material |
| Wing | AISI 1010 |
| Plating | ASTM B633, SC1, Type III, (Fe/Zn 5) |
| Anchor Body | Engineered Plastic |
Ordering Information : Strap-Toggle : | Cat. No. | Anchor Size | Drill Diameter | Wall Thichness | Std. Box | Std. Carton | Wt./100 |
| 4052 | 3/16" x 4" | 1/2" | 3/8"- 2 1/2" | 50 | 300 | 3 1/2 |
| 4054 | 1/4" x 4" | 1/2" | 3/8"- 2 1/2" | 50 | 300 | 3 1/2 |
| 4056 | 3/8" x 4" | 3/4" | 3/8"- 2 1/2" | 25 | 150 | 5 |
| 4058 | 1/2" x 4" | 3/4" | 3/8"- 2 1/2" | 25 | 150 | 5 |
View Product Specification