Now Hiring

CONSTRUCTION SALES POSITIONS The key to success with Carroll is a person’s drive
and determination. If you are a self-starter with
a construction background, then we want to talk to you!

Careers

Fabricated Rebar

Rebar Design and FabricationWe stock all sizes of rebar and gauges of wire mesh. We will deliver stock or fabricated rebar to your job site for all your concrete jobs.

Place an Order

Waterproofing

CHEMICALS AND WATERPROOFINGGrouts, Cures, Sealing Compounds, Form Release, Admixtures, Hardeners & Grout, Membrane Waterproofing, Restoration Products, Moisture & Vapor Protection

View Products

Decorative Concrete

Color & Stamping SuppliesStains • Releases • Concrete Colors • Color Hardeners • Stamping Tools • Material Spreaders • Concrete Buggies • Vibrating Screeds • Power Trowels • Cures ,Paving & Sidewalk Forms

View Products

Home / Categories / Fasteners | Anchors / Wall-Ties and Anchors /

MASA/MASAP Mudsill Anchors

Simpson Strong-Tie

SKU / Product Info	Quantity
masaz Material: 16 gauge/Finish: Galvanized, all available in ZMAX® coating. See Corrosion Information.

Quick Overview

Use all specified fasteners.

MASA/MASAP

- Concrete shall have a minimum f'c = 2500 psi.

- Spalling — Full loads apply for spalls up to a maximum height of 1 1/4" and a maximum depth of 7/8". Any exposed portion of the mudsill anchor must be protected against possible corrosion.

- For prescriptive anchor spacing refer to table.

- Testing shows that these mudsill anchors can be used in lieu of code required anchor bolts and square washer in high seismic zones. Refer to flier F-C-MASA for additional information.

- Minimum MASA end distance is 4" and minimum center-to-center spacing is 8" for full load.

- For continuous load path, MASA should be installed on the same side of wall as uplift connectors.

Interested in this item or want more information?

Hours: 8:00 & 5:00 CST

Phone:

Email: Click Here

Can't find what you want? Give us a call and we can help you find it.

Details

Mudsill anchors have always been a time-saving alternative to anchor bolts, and the MASA anchors provide even greater load-carrying capacity alternative for 5/8" and 1/2" mudsill anchor bolts on 2x, double-2x and 3x mudsills. It also eliminates the need for 3" square plate washers for seismic design and, in some cases, has load capacities that meet or exceed the parallel and perpendicular to plate shear capacity of other cast-in-place anchors. Two versions of the MASA are available – the standard MASA for installation on standard forms and the MASAP for panelized forms

The MASA and MASAP are code listed by ICC-ES under the 2006, 2009 and 2012 IBC® and IRC® and have been tested to meet the requirements of ICC-ES acceptance criteria AC-398 for cracked and uncracked concrete.

Additional Information

Manufacturer: Simpson Strong-Tie

For More Information on the MASA/MASAP Mudsill Anchors, [Click Here] to Link to Manufacturer Web Site