This unit features a long handle, heavier stroke, two times the weight, and double the BPM of the bench model. This unit is easily held from a standing position while compacting very large molds at floor level.
- Time tested valve design
- Front end seal excludes dirt and grit
- Round piston rod
- 3"(76mm) butt included
- Optional front end butts available
Interested in this item or want more information?
Hours:
Phone:
Email: Click Here
Can't find what you want? Give us a call and we can help you find it.
Details
| Model | 241A1M |
|---|
| Blows per Minute | 1590 |
| Piston Stroke in. (mm) | 4" (102) |
| Weight w/o Accessory lb (kg) | 26.88 (12.2) |
| Length w/o Accessory in. (mm) | 52.75" (1370) |
| Bore in. (mm) | 1-5/16" (33) |
| Butt Diameter in. (mm) | 3" (76) |
| Air Inlet in. (NPT) | 1/4" |
| Minimum Hose Size in (mm) | 3/8" |
| Air Consumption @ Load cfm (L/min) | 29 (821) |
Additional Information
Manufacturer: Ingersoll Rand
For More Information on the 241A1M Floor Sand Rammer,
[Click Here] to Link to Manufacturer Web Site